Customizable Rf Power Amplifiers GF100W400-700MHz Lora GaN Module Anti-drone Module Built-in VCO

Product Overview

This QHXK RF power amplifier module is listed as Customizable Rf Power Amplifiers GF100W400-700MHz Lora GaN Module Anti-drone Module Built-in VCO. The stated frequency range is 400–700 MHz. The specifications below are taken from the supplied product listing and should be confirmed against the current datasheet before integration.

Key Specifications

• Frequency range: 400–700 MHz
• Gain: 50dB
• Supply voltage: 28V
• Connector / mounting: N-K
• Manufacturer part number: 100W 400-700MHz

System Integration

For 400–700 MHz RF power amplifier module, confirm the required input signal level, supply conditions, RF connectors, mechanical fit and thermal management with the host system. Values not listed above should be checked with QHXK before design approval.

Application and Technical Support

This module is offered for integration into compatible RF equipment. Application suitability depends on the operating band, system design and applicable regulations. Contact QHXK to request the detailed datasheet and discuss interface or customization requirements.

Product selection: 400–700 MHz

The GF100W400-700MHz listing is intended as a starting point for projects reviewing reviewing a broader listed band against the complete project requirement. The stated band for this model is 400–700 MHz. Confirm that the complete project requirement fits the exact model under consideration; do not infer performance beyond the information published for this product. The product listing and model reference identify the item, while the current datasheet should be used to verify detailed operating limits and guaranteed performance.

The GF100W400-700MHz listing identifies a broader frequency span than some of the other models in this product family. That can make it a candidate for projects whose documented requirement falls within the stated range, but the product title alone does not establish performance uniformity across the band or suitability for every system. The current datasheet should be used to review the guaranteed operating conditions.

A useful comparison starts with the full frequency requirement, not just a center frequency. Next, check the host equipment’s RF interface, supply arrangement, mechanical space and thermal design against the supplier’s documents. If the project has a specific duty cycle, environmental condition or qualification requirement, include that information in the inquiry so the exact configuration can be reviewed.

This model can be compared with the 400–500 MHz and 360–460 MHz listings in the QHXK catalogue. Those products have different stated ranges and should be assessed individually. Ask for the datasheets for the shortlisted models before deciding whether a single model or a different configuration is appropriate.

Information to prepare for a configuration review

• The exact model reference and required frequency range.
• The intended equipment interface and RF connector requirements.
• The available DC supply interface and installation constraints.
• The mechanical envelope, mounting details and cooling provisions.
• The operating environment, expected quantity and any required qualification documents.

Frequently asked questions

Is a broader frequency listing automatically the best option?

No. Select against the complete requirement and the guaranteed data in the exact model’s datasheet. A broader listed range does not by itself confirm equivalent performance at every frequency.

Can this model be substituted for a narrower-band version?

Do not assume interchangeability. Compare the datasheets, interfaces and project requirements, then obtain confirmation from QHXK for the selected model.

Which document should be used for final technical approval?

Use the latest controlled datasheet and mechanical drawing for the exact model and revision. Ask QHXK to clarify any requirement that is not covered by the published documentation.

Related models

For comparison, review GF100W400-500MHz RF power amplifier module and GF100W360-460MHz RF power amplifier module. The stated bands and model references differ; use each product’s own documentation when comparing candidates.

Documentation for engineering approval

Before a module is approved for an OEM assembly, request the latest datasheet and mechanical drawing for the exact model. Review the documented RF and DC interfaces, mounting details, thermal instructions, operating limits and product revision with the responsible engineering team. Keep the supplier’s controlled documents with the project record so the quoted and approved configuration can be traced.

QHXK’s GaN RF power amplifier module portfolio and custom RF power amplifier design and manufacturing pages provide further product-family context. For model-specific documentation, configuration questions or a quotation, contact QHXK.

Any RF equipment must be evaluated and operated only within applicable laws, spectrum authorizations and site permissions. Product availability does not itself authorize radio transmission or deployment.