Customizable Rf Power Amplifiers GF100W5150-5250MHz Lora GaN Module Anti-drone Module Built-in VCO

Product Overview

This QHXK RF power amplifier module is listed as Customizable Rf Power Amplifiers GF100W5150-5250MHz Lora GaN Module Anti-drone Module Built-in VCO. The stated frequency range is 5150–5250 MHz. The specifications below are taken from the supplied product listing and should be confirmed against the current datasheet before integration.

Key Specifications

• Frequency range: 5150–5250 MHz
• Gain: 50dB
• Supply voltage: 28V
• Connector / mounting: N-K
• Manufacturer part number: 100W 5150-5250MHz

System Integration

For 5150–5250 MHz RF power amplifier module, confirm the required input signal level, supply conditions, RF connectors, mechanical fit and thermal management with the host system. Values not listed above should be checked with QHXK before design approval.

Application and Technical Support

This module is offered for integration into compatible RF equipment. Application suitability depends on the operating band, system design and applicable regulations. Contact QHXK to request the detailed datasheet and discuss interface or customization requirements.

Product selection: 5150–5250 MHz

The GF100W5150-5250MHz listing is intended as a starting point for projects reviewing qualifying a specific 5 GHz band configuration. The stated band for this model is 5150–5250 MHz. Confirm that the complete project requirement fits the exact model under consideration; do not infer performance beyond the information published for this product. The product listing and model reference identify the item, while the current datasheet should be used to verify detailed operating limits and guaranteed performance.

The GF100W5150-5250MHz model is listed for 5150–5250 MHz. It should be evaluated against the exact frequency requirement and the complete equipment specification. For a 5 GHz RF design, check that the signal source, filters, interconnects, connectors and test equipment are documented for the intended band. A product listing is an initial reference; the current datasheet provides the detailed information needed for engineering review.

Before procurement, confirm the exact model reference and revision, then review the RF and DC interfaces, mechanical drawing, mounting arrangement and thermal instructions. If the host equipment has a constrained enclosure or a specific connector orientation, include that information in the inquiry. This can help determine whether the listed configuration is suitable or whether a different documented option should be considered.

The catalogue also includes 5700–5800 MHz and nominal 5.8 GHz listings. These are separate product descriptions and should not be treated as interchangeable without a datasheet comparison and written supplier confirmation.

Information to prepare for a configuration review

• The exact model reference and required frequency range.
• The intended equipment interface and RF connector requirements.
• The available DC supply interface and installation constraints.
• The mechanical envelope, mounting details and cooling provisions.
• The operating environment, expected quantity and any required qualification documents.

Frequently asked questions

Is 5150–5250 MHz interchangeable with a 5.8 GHz model?

No. The stated bands differ. Compare the exact operating limits and guaranteed data for each model before selecting one.

What should be included in the purchase specification?

Include the exact model reference, approved datasheet revision, required frequency range, interfaces, mechanical documentation and agreed acceptance records.

Which document should be used for final technical approval?

Use the latest controlled datasheet and mechanical drawing for the exact model and revision. Ask QHXK to clarify any requirement that is not covered by the published documentation.

Related models

For comparison, review GF100W5700-5800MHz RF power amplifier module and GF100W5.8GHz RF power amplifier module. The stated bands and model references differ; use each product’s own documentation when comparing candidates.

Documentation for engineering approval

Before a module is approved for an OEM assembly, request the latest datasheet and mechanical drawing for the exact model. Review the documented RF and DC interfaces, mounting details, thermal instructions, operating limits and product revision with the responsible engineering team. Keep the supplier’s controlled documents with the project record so the quoted and approved configuration can be traced.

QHXK’s GaN RF power amplifier module portfolio and custom RF power amplifier design and manufacturing pages provide further product-family context. For model-specific documentation, configuration questions or a quotation, contact QHXK.

Any RF equipment must be evaluated and operated only within applicable laws, spectrum authorizations and site permissions. Product availability does not itself authorize radio transmission or deployment.