RF Power Amplifier 700-2700MHz 100W

Product Overview

The RF Power Amplifier 700-2700MHz 100W is an RF power amplifier module for integration into professional RF equipment. Its published specifications include frequency coverage of 700MHz~2700MHz, CW output specified as ≥ 50±0.5dBm, gain of ≥ 49dB (customized).

The listed operating supply is +28V~ +32V. The RF connector is SMA-F. The stated mechanical specification is 238×128×26.5mm (without connectors), ≤2KG. Temperature protection is listed as Over 80℃ protection，with open circuit protection.

Technical Specifications

Integration Considerations

Plan the power supply, RF connections and thermal management around the electrical and mechanical specifications shown above. Contact QHXK for configuration options and documentation.

700–2700 MHz, 100 W: what to check

This module is listed for 700–2700 MHz, with CW output of ≥50±0.5 dBm and customized gain of ≥49 dB. The technical table specifies gain flatness of ≤2±1 dB, input power of 2±2 dBm, maximum input of +8 dBm and input VSWR of ≤2.0.

The listed working-voltage range is +28 V to +32 V, with working current of ≤9–12.8 A. The RF connector is SMA-F. The table also lists a 3.3–5 V PTT on-level, over-temperature and open-circuit protection, and an operating-temperature range of -40°C to +55°C. A radiator is specified for power-amplifier testing.

Wideband integration considerations

Because the stated frequency range spans 700–2700 MHz, check the performance curve across the complete band. Do not assume that output power, gain, efficiency or matching is identical at every frequency. Confirm the test frequencies, CW rating, gain-flatness limits, supply conditions and cooling arrangement in the current datasheet.

• Confirm the required frequency span and any band-edge margin.
• Check the RF source level against the listed input and maximum-input values.
• Size the DC supply using the specified voltage and current requirements.
• Verify the SMA-F interface, mounting dimensions and thermal path.
• Request test data for the exact configuration before system approval.

Frequently asked questions

What does 50 dBm represent?

50 dBm is equivalent to 100 W. This listing specifies CW output of ≥50±0.5 dBm; confirm the meaning of the tolerance and the guaranteed performance conditions with the manufacturer.

Does the amplifier deliver the same performance across 700–2700 MHz?

Not necessarily. Review the manufacturer’s gain, output-power and matching data across the full operating range.

For related models, compare the 500–2700 MHz, 50 W RF power amplifier. Read the RF PA selection guide and wideband vs. narrowband comparison, or browse the RF power amplifier module range. For datasheets and configuration support, contact QHXK.