RF Power Amplifier 2000-3000MHz 100W

Product Overview

The RF Power Amplifier 2000-3000MHz 100W is an RF power amplifier module for integration into professional RF equipment. Its published specifications include frequency coverage of 2000MHz~3000MHz, CW output specified as ≥ 50dBm, gain of ≥ 49dB (customized).

The listed operating supply is +28V~ +32V. The RF connector is SMA-F. The stated mechanical specification is 206×132×27.3mm (without connectors), ≤2.06KG. Temperature protection is listed as Over 80℃ protection.

Technical Specifications

Integration Considerations

Plan the power supply, RF connections and thermal management around the electrical and mechanical specifications shown above. Contact QHXK for configuration options and documentation.

2000–3000 MHz, 100 W model overview

This module is specified for 2000–3000 MHz, with CW output of at least 50 dBm (100 W) and customized gain of at least 49 dB. The published table lists gain flatness of ≤2±1 dB, input VSWR of ≤1.7 and input power of 2±1 dBm.

Electrical and RF integration

The working-voltage range is +28 V to +32 V and operating current is listed as ≤12–13.8 A. The table gives a 32 V/16.8 A supply reference; confirm the recommended supply capacity and test conditions with QHXK for the exact configuration. The RF connector is SMA-F, and the PTT port is listed as default off with 3.3–5 V for on.

The table also lists over-temperature protection above 80°C, spurious output of ≤−65 dBc, a harmonic specification of worst point ≤−10 dBc and an operating-temperature range of −30°C to +55°C. The stated dimensions are 206 × 132 × 27.3 mm without connectors. A radiator is specified for power-amplifier testing.

Selection checklist

• Confirm that the full required band is within 2000–3000 MHz.
• Check the CW output definition, gain and gain flatness.
• Verify RF input drive and input VSWR requirements.
• Confirm supply voltage, current budget, PTT logic and SMA-F interface.
• Review the mechanical drawing, cooling arrangement and ambient-temperature limits.

Frequently asked questions

What is 50 dBm in watts?

50 dBm is equivalent to 100 W. The listing identifies this as CW output; confirm the test conditions and guaranteed frequency range in the latest datasheet.

Is the supply reference the same as the operating current?

The table lists a 32 V/16.8 A supply reference and a separate operating-current range. Confirm the correct supply sizing for the exact model and operating conditions with QHXK.

For additional guidance, read the 100 W RF PA selection guide and high-power PA thermal design guide. Browse the RF power amplifier category or contact QHXK for the current datasheet.